Cost-effective, high performance lintels for use in plastered and rendering situations.

Naylor Hi-Spec Lintels are prestressed to ensure optimum performance and come with 30 minutes fire rating as standard. They are cost effective, high- performance and typically used in plastered and rendered situations. Due to the use of additives and concrete strength, these units are suitable for use below ground.

Hi-Spec lintels can be fixed into, on site provided the prestressing tendons contained within the units remain undamaged. We would suggest contacting our technical team to discuss specific requirements.

Pre-stressed concrete lintels ensure optimum performance and have a high span to depth ratio which results in lighter units. Each lintel is marked at the ‘top’ to ensure correct orientation during installation.

Naylor Hi-Spec lintels are available in 14 different section sizes and in widths of 100mm, 140mm, 190mm and 215mm with lengths ranging from 450mm to 4800mm dependent upon section size.  They can also be cut to length without adversely affecting product performance.  Typically supplied with textured finish, they are ideally suited to plastered or rendered applications

Typical Applications & Uses

Naylor Hi-Spec lintels are suitable for use in the construction of a wide range of applications including:

• Residential apartment blocks
• Schools
• Hospitals
• Care homes
• Shopping centres
• Industrial and commercial
• Leisure and sports stadia
• Airports

• BS EN 1992-1-2: 2004 – Classification of fires
• BS EN 845: Part 2: 2013 + A1: 2016 – Specification for ancillary components
• BS EN 206: 2013 + A2: 2021 – Concrete specification performance production and conformity
• BS 8500 -1: 2015 – Complimentary BS to BS EN 206
• Prestressed wire complies with BS 5896: 2012 – High tensile steel wire and strand for the prestressing of concrete